...reset the oil life monitor. Turn the ignition to accessory on. Pump the accelerator three times. The Oil Life Monitor will flash for about 5 seconds indicating it has been reset correctly. The oil ...
...that light is a maintenance reminder light. Check with who ever changes your oil, and have them reset it. Usually the turn key/pump 3 times works for the check engine light. Smart to try that
...oil changed and now I have a service engine soon light that will not go out Most likely the air flow sensor was left of the intake hose going from the air filter housing to the air intake of your ...
...reset the oil life monitor 1994-99 BUICK LESABRE CHANGE OIL SOON Light 1. CHANGE OIL SOON light will come on when engine oil has broken down enough to require changing. After changing oil, reset oil ...
...on the 4th hold it to the floor and wait for for the display to reset. They probably did that for you each time they changed the oil and either had someone new, new place, or they just plain
...if your oil is full end the light is still on then you have a bad oil sending unit cheap to fix yourself Have the oil changed and reset the % gauge for the oil life with the driver information
...reset oil change light Hello javjr. Here is what it says in the owners manual. Turn the ignition to "ON". Press the GAGE INFO button on the Driver Information Center (DIC) switch to view OIL LIFE ...
reset. Turn the key to the run position and press the button. The change oil message should flash, press the button again and the low tire message should flash, press and hold the button until the low
Question about 1999 LeSabre
oil level is at full and I have less than 2000 miles since my last oil change. Is this something to worry about, or just an aberration? Thank you sounds lie the 'alarm' wasn't reset at last oil change
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions