Question about VPL PX11 Multimedia Projector
...lamp, reset LCD - still displaying replace lamp I've replaced the lamp, reset it and it works. But now, each time I go to use LCD, it displays replace lamp and has to be reset to omit message. You ...
...reset lamp timer. Won,t turn on because lamp timer has expired to 0. Needs to be reset. Lost our manual. Please help. Hello, "Reset the lamp counter i. Press and hold Exit on the projector for 3 ...
...lamp time reset Please send directions for lamp time reset Thanks. Lamp Time Reset Procedure: Be sure to reset the Lamp time to "0" after replacing the new Lamp. 1. Plug in the AC Cord, and turn on ...
Question about PT-61LCX65 61" Rear Projection HDTV
...reset the lamp hours . So even after changing the lamp ,it still indicates to change the lamp. I have tried up ,down and enter but it does not work. Please give u r advice Thanks, This should work: ...
Question about PT-LB20U Multimedia Projector
...reset lamp time. Press the MENU button to display the "MAIN MENU", and then select "OPTION". Press the ENTER button to display the "OPTION" menu, and then select "LAMP RUNTIME". Press and hold the ...
...reset the lamp operation time on a Mitsbishi XD480U: Plug in the power cord, turn on the lamp, and press the Left Arrow button, Right Arrow button, and POWER buttons on the control panel ALL AT THE ...
...reset the lamp operation time on a Mitsbishi XD480U: Plug in the power cord, turn on the lamp, and press the Left Arrow button, Right Arrow button, and POWER buttons on the control panel ALL AT THE ...
...reset lamp timer dont have the book and i cant reset it it keeps turning off on me Here is the procedure for reseting the lamp. It can be found at: ...
Question about VLT-XD221LP Replacement Lamp for XD221U/SD220U
lamp reset Kumar Salem Reset of the lamp operation time 1,Connect with the Power cord, and turn the power on. 2,with a signal supplied to the projector. 3,Menu--INSTALLATION--LAMP TIME RESET-and press
reset lamp time The lamp time is the time counted after the last resetting. It is shown in the OPTION menu as the usage time of the lamp. Pressing the RESET button on the remote control or the ? ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions