Questions & Answers for: Lexmark reset counter

Question about E232 Laser Printer

3 Answers

1:0:449:0:0&emeaframe=&docid=ENUS21294 Try this link. I replaced the PC Photoconductor on the Lexmark X204n and the message continues to replace. I don't know where to reset the counter. Please advise

Ad

...reset the counter: 1. Select Reset PC Cnt from the CONFIG MENU. 2. Press Select to reset the counter to zero. Note: Permanent page count is not affected by this operation. I hope this helps, Buddy ...

Ad

Question about E450dn Laser Printer

3 Answers

...counter please see the following link--- Photo Conductor Counter Reset Please do rate this solution as FixYa and revert for further assistance. Thanks Rylee this link in nok 84 replace ...

Question about E260D - QTY 4 - LMB OFFER Laser Printer

2 Answers

...reset the counter for a Lexmark e260d after replacing the photoconductor kit? After replacing all the items in the photoconductor kit, reset the maintenance counter: 1 Press and hold the Select and ...

Question about E232 Laser Printer

1 Answer

...button on left side). 2. Press and hold the cancel button (x button) until all the lights flash in order. 3. Then close the front cover. This will reset the drum counter to enable continued

Question about Lemark E352DN Laser Printer

1 Answer

reset fotoconductor lexmark e352dn NOTE: Resetting the photoconductor counter/page counter should only be done whenever you replace the photoconductor unit. Here's an article in the Lexmark website on

Question about Lemark E352DN Laser Printer

1 Answer

...reset the PC counter, Instructions on how to replace photoconductor unit available at http://bit.ly/aykTXL Instructions on how to reset photoconductor counter available at http://bit.ly/9WAvUK ...

Question about E260 Laser Printer

2 Answers

...reset the pc count on your printer. Please click on the link below for the steps. http://bitly.com/r8ZhYJ If you need further assistance, please contact Lexmark Technical Support Center. A NOTE OF ...

Question about E342n Laser Printer

1 Answer

...• Press and hold Select and Return while turning the printer on. • Release the button when Performing Self Test displays. • Select Reset Maint Cnt, and press Select. The counter is reset to

Question about E260dn Laser Printer

1 Answer

reset photoconductor counter on Lexmark E260dn Please click on the link below, this will show you how to reset the photoconductor counter. http://bitly.com/rh8ZSV If you need further assistance please

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...