Questions & Answers for: reset chimes wall clock

...chimes work but not the clock, is there a reset button,how do we get it working. it is 11yrs old? and been in storage for 6mnths Press the red button at the back and go through all the hourly chimes ...

chimes once for 1PM and you need it set to 6PM then you press the test button to reset the chime and repeat press the button 5 times. This will set the chime to 6 PM. If you get lost on the time press

...reset wesrminister wall chime clock We stopped the clock to pack it to move. How do we reset it so it will chime If this is a mechanical clock, make sure the chime lever is set on. If quartz there is ...

...reset clock chimes I have a Howard Miller wall clock that the chimes are out of sync how do I fix them? The next time it gongs multiple times turn the hour hand clockwise until it is pointing at the ...

chimes do not work Battery operated clock can't get it to chime any idea's new battery Check for loose wires between the clock Movement and the chime box. If those are good (and the batteries have ...

...reset the chimes for a Strausbourg Manor Quartz Movement wall clock? and what is the magnet for? Try removing the batteries. Set clock to 5:45. Reinsert the batteries, and set to 6:00. it may take an ...

...wall clock with pendulum? There is only a Reset button and a Final setting. No option visible to shut chime off Are there two batteries. One for the time and one for the chime? Try taking the one for ...

...reset only by turning the hands forward and pausing at each quarter, half and hour to allow the chiming of each to complete. Most folk simply stop their clocks and wait for time to catch up... It is ...

...chimes the right hour .how do I set it to chime right for the right hour Not sure if this will work for you but I had a used one and when I set mine at 12 it would chime 9. So I turned my clock ...

...chimes return. There should be knobs on the side of the clock to help you do this. If not on the side, then please check on the back. Since you've already checked the settings and ruled them out as ...