Questions & Answers for: reset change oil light oldsmobile

Question about 2000 Alero

1 Answer

oil light where is the change oil light reset button on a 2000 alero 3.4L 2 door Driver side. fuse box . take off . there should be a red reset button that looks like a fuse

Ad

Question about 2004 Alero

1 Answer

...change dash light We just changed the oil on my 2004 olds Alero. Just can't remember how to reset the idiot light . Turn ignition key to the on position (with engine off). Depress accelerator pedal 3 ...

Ad

Question about 2001 Alero

2 Answers

...reset the change oil dash light, can you help?? Try disconnecting the battery If it is the same as the 2001 Alero, open the fuse panel on driver side. Turn key in the ignition to ON. Hold Tire/Oil ...

Question about 2001 Alero

2 Answers

...change your oil you must reset your system to start tracking your next oil change. Simply take off your fuse panel cover. There is a red button in there marked RESET. To do this simply turn your ...

OIL CHANGED ON MY 2000 OLSMOBILE ALERO, NOW MY SERVICE ENGINE SOON LIGHT IS ON. IIS THERE A RESET SWITCH? in the control panel one the right side of the car there is a reset button. all you have to do

...and press the reset button in the fuse panel just inside the drivers door once the change oil light starts blinking press and hold the reset button until you hear a chirp sound and the light goes

...reset the Change Oil light turn the ignition on but do not start the engine. Push the RESET button located in the driver's side instrument panel fuse block. The light will start to flash, press and ...

Question about 2004 Alero

1 Answer

not be reset,but the oil change light can,,Turn the key to on,and push the accelerator 3 times slow ,with in 5 seconds,this will turn the oil change light off.If this was helpful,please rate thank you

Question about 2004 Alero

1 Answer

...reset change oil light read below on how to do that Oldsmobile Alero 2004 Turn the ignition to ON, with the engine off. Fully depress and release the accelerator pedal slowly three times within five ...

...Reset the Change Oil Light After changing the engine oil, the system must be reset. With the ignition key to ON, push the RESET button located in the driver's side instrument panel fuse block. The ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...