Questions & Answers for: reset change oil light gmc

...oil light flashing We changed oil rest by pressing gas pedal 3 times. It flashed for 5 seconds. But now when I crank engine the light will flash 5 times Why? Try reseting it again. Sometimes it takes ...

...xl how to reset change oil light turn the key to the run position engine off, push the gas pedal all the way to the floor then release it 3 times within 5 seconds, the DIC will say oil life

...(DO NOT START) press and release gas pedal 3 times. leave key on the change engine oil light flashes 5 times than goes away and its reset The place that changed your oil should have done this for ...

CHANGE ENGINE OIL light won't go off. I just had my oil changed, and I tried to reset my indicating light on the dash (by following the owners manual - turn the key to 'run' then push the brake pedal ...

...reset the change oil light on a 2003 chevy silverado Information courtesy of synthetic-direct.ca Chevrolet Suburban/GMC Yukon XL, 2000-05 Chevrolet GMC Trucks Silverado, Sierra, 1999-05 Chevrolet ...

reset oil change indicator? Chevrolet Service Light - For Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra 2000-01 and 1999-00: Turn the ignition key to the RUN position. Fully

...CHANGE OIL SOON light flashes 2 times, the system is reset. However if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset. Good ...

...reset oil change light? I changed my. How do I reset the change oil light? I do not have an owners manual. Make and Model: Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra ...

...reset service lamp after oil change on a 2000 yukon gmc I have a 2005 GMC Envoy and you turn the key to on, then press the gas pedal to the floor three time in 5 sec. The oil light blinks once and ...

how do i reset the change oil light on the dash after changing the oil YOU NEED CODE SCANNER TOOL TO RESET LIGHT/BRING TO GARAGE TO RESET IT