Questions & Answers for: Canon reset button

...reset button, but it stillwon't work. I switched the printer off and than on, but the problem stays. What shall I do? Two flashes: Out of paper, paper jam or paper feed error Replace the paper ...

...reset but I don't know how, I have pressed the "resume" button, then pressed the "on" button, then pressed "resume" twice. No help. I pressed the "Resume" button 5 times again no help.Please can ...

...button and the printer operated as normal. Refer to the manual or online to find out how to properly execute the waste tank procedure. Also the manual should tell you how to reset the code ...

...reset procedure (I guess this may have been a bad idea?). Now, when I turn the printer on it makes all the moving around noise and then turns itself off. I can't go into service mode as it just makes ...

...SLIDE ON THE PAPER INPUT. THANK YOU. Hello there Hi there you can try. Following step by step resetting canon Pixma iP90 : Before resetting printer canon iP90, start with printer power

...reset waste ink counter, perform the following steps: Plug in power cable While pressing Resume button press and hold Power button (do nor release the buttons) Release Resume button (still hold Power ...

...reset button keeps flashing. Also has been stating for a while that 'the ink tank is full' - i noticed that there was some ink on the inside right (facing the printer) and have cleaned this area. I ...

...Reset button on the printer. While pressing the Reset button, press and hold the Color Start button. Wait for 5 seconds. Release the Color Start button, and then release the Reset Button. Wait until ...

...reset the black ink low in the Canon pixma MX472 How do I clear the black ink low? Try holding down the stop/reset button on the printer for 5 seconds. It should clear the empty ink cartridge

...the eCopy machine. From: ...