Questions & Answers for: Canon imageCLASS reset button

...button, then 03 for fax report, and the whole machine froze up. I unplugged it for 10 minutes, nothing. How do I reset it to work again? it responds when i open the tray, it warns me as usual, but ...

...won't come back on . Is there a power button or reset button on this machine? try uplugging for a few seconds and replug it back to wall socket or push powersave button on control panel then try to ...

button until ?NV-RAM INITIAL? is displayed. Half way, dont stop too long it will time out.... 5) Press "ENTER" again. 6) Will appear "TABLE 1" message. 7) Press "ENTER" until "EXECUTING RESET" message

...RESET 6) Pres the < Set > button a. You will see the following: # 7 PRINTER < YES NO > 7) Press the < ? > or < ◄ > button to choose YES: a. You will see the following: # 7 PRINTER # 5 MLT ...

...reset button does not solve the problem or a 15 min. power off reset. Unplug your USB cable and the fax should start working. If this fixes the issue, it could be a problem with your USB cable or ...

...button again until it says "Printer Reset" Then press "Set" again, the display will ask you "Yes" or "No". Press the "Left" arrow for "Yes", then press "Set". Now, unplug the power cord and wait 5 ...

RESET 6) Pres the < Set > button a. You will see the following: # 7 PRINTER < YES NO > 7) Press the < ? > or < &#9668; > button to choose YES: a. You will see the following

...Reset button and the Power button for 5 seconds b. Release Stop/Reset button but continue to hold Power button c. Press Stop/Reset twice d. Release the Power Button e. Wait for the light to stop ...

RESET button. Press and hold POWER button. Release STOP/RESET button without releasing power button. Click STOP/RESET two times and then release power button. Now your printer enter into service mode.

...reset machine? Hi Dear Follow the mention below instruction. 1 First, unplug the power from the printer and all connections (including usb to the PC as well). 2 Next, press and hold the Start button ...