...flashes, press the button that corresponds with the Start/Stop button to change the hour, press the button marking reset should go to the minutes and so on, when finished press the mode button
...reset buttons Press and hold the lower right button to display the date, then press the lower left button. If now all the weekdays are turned off, the hourly signal is turned off too. If the weekdays ...
...are as you would like them. Hit "RESET" button to finish. So, to change just the day, I would hold down "RESET," hit "MODE" four times, hit "ST/STP" until the date is correct, hit "RESET" to
...reset" button until they start flashing and use the start button again. pressing the reset button again will bring up the date to change. keep pressing until nothing is flashing any more and poress ...
...RESET 1. Pull the "M" button out to the setting position. 2. hold down the "A", "B", and "C" buttons simultaneously for 3 seconds, then release them. All digit segments will turn on and display ...
...button on it's own, and two buttons. normally a symbol, a dot or a image of an alarm bell, etc. will light up to show the alarm is activated and when you deactivate the alarm it will dissapear. Start ...
...reset time nor how to set alarm... the middle button just shows what time the alarm is set to, the third one shows what should be a calendar of sorts but the dates are wrong. The first button shows a ...
...RESET button 1X quickly(Minutes will flash) & you change Minutes by pressing START button 3.Press & release RESET button 1X quickly(Hour will flash) & you change Hour by pressing START ...
...button labeled RESET until the item you want to change is flashing. Pressing RESET cycles through seconds, minutes, hours, day, month, day of the week in the top sub-dial and then back to seconds ...
Usually answered in minutes!
756 Questions
28 Questions
21 Questions
18 Questions
20 Questions