Questions & Answers for: reseat cartridge

will only print in black!! try reseating the cartridge & also reseat the power brick assembly.....also if u hv the factory installed cartridges....try installing those & chk if u still get the error..

...Try to reseat the ink cartridge. . move the cartridge holders manually while power is off. to reseat the cartridges .that will clear the error.if it still persist do let me know.thanks and

...message UO71 that says I have more than one cartridge of the same color, which I don't. I have reseated the cartridge, bought a new cartridge, thus far nothing has worked, when I reseated the ...

...please help. the black cartridge still has ink in it so i have no clue what the problem is... Try reseating the ink cartridges. The error references to either reseating or refilling the ink ...

reseat ink cartridge. I keep doing that and it doesn't read it. Did you reset your printer after reseating the cartridge? You may also need to restart it after reseating it. my printer was fne until i

...to allow the new cartridge to expose the toner? Remove the Toner cartridge and reseat it. After reseating it, wait for the printer to recognize the cartridge, then turn the printer off, then back

...cartridge is bad. Open the front of the printer, pull out the Cyan Toner Cartridge, reseat making sure it fits all the way to the back. If the problem is not resolved replace the Cyan Toner

...bought a new 92 Black cartridge and the color cartridge is full ... why is this happening? While reseating a cartridge is not difficult but there are a number of errors that can occur if the user ...

...and make sure the tab has been removed, reseat the cartridge and try again. if there are other cartridges, remove them, -- shake the cartridges and reseat them. if this failes , refer to your ...

though it has a brand new cartridge. Please try the following steps. Turn the printer OFF. Reseat the cartridge. Switch the printer ON. Or Open the top cover. Reseat the cartridge. Close the top cover