where is the output speed sensor on my 2000 Volvo S70 ? It seems to have brake and trans problems. The front brake would act like it was trying to apply the brake while driving down the road. The ...
check engine light is on something about the TAC? recently replaced spark plugs Hi there: DTC P0638 - Throttle actuator control range/performance The engine control module (ECM) opens the throttle ...
Question about 2007 S60 2.5T
the check engine light came on message was in reference to the TAC? Hi there:DTC P0638 - Throttle actuator control range/performance The engine control module (ECM) opens the throttle blades by ...
Question about 1999 S80
2000 radiator fan test, is there any way to test the fan before o get a new one check cooling fan fuse or fuse link.it all is good. fan relay or engine coolant temperature sensor.could have ECM FAULT ...
Question about 2006 XC90
...replacing the part? P0089/ ECM-2900 DIAGNOSTIC TROUBLE CODE (DTC) INFORMATION Diagnostic trouble code (DTC) information ECM-2900 Condition The engine control module (ECM) controls the fuel pressure ...
325 memory loss??? volvo v 40 why? i assume you're talking about the ecm setting a code for memory loss? If so, i'd take it to the dealer and have them reload the ecm. that will overwrite the code in ...
Question about 2006 XC90
Hi im Have Volvo S40 2.0Diesel the computer show ECM-2683 Bypass valve signal too high.Whats part I need to replace? The engine control module (ECM) checks the signal from the by-pass valve in the ...
Question about 2006 XC90
...you have a wiring loom connector disconnected say at the ECM or at the engine loom for the injectors ,I would suggest replacing the ecm with a known good one as the common failure point is the ...
Question about 2006 XC90
injector stays open when it should be shut. We have a 08 Volvo 780 D12 . We have replaced the Egrs, injectors, cups, egr temp sensor. They rebooted the ECM. I'm thinking the Injector Wiring Harness. ...
Question about 2006 XC90
I have a fault code of P1608 in my 2000 volvo s80 t6 could you help me with what it is You have a fault code originating from the Electronic Control Module (or ECM) which could mean you need to have a
Usually answered in minutes!
664 Questions
682 Questions
587 Questions
551 Questions
468 Questions