Questions & Answers for: replacing controller precor treadmill

...Precor 9.25i treadmill that was determined to have a bad drive motor. The repairman had first tried a replacement controller board which did not solve the problem. I since replaced the motor myself, ...

Precor 9.27 Control Portion Not Turning On Recently I was sprinting on my treadmill when it shut off on its own suddenly. I turned it back on but only the on switch was activated. The control board at

Precor 9.27 Control Unit will not turn on. I have already tried replacing the fuse, but that did nothing. The red switch illuminates but the unit with the speed and incline control will not turn on. ...

...treadmill? Precor Error 01, Memory, RAM, EEPROM Test Error Probable Cause This error message almost always indicate an upper PCA problem when they are consistently displayed. Failures causing this ...

Precor Model: All Models Error Description: Error 21, Too many Consecutive Power Requests- The error 21 observes a treadmill's power bit reading when the treadmill was operating at speeds above 1 mph.

precor 9.33 smells A few questions? How old is your treadbelt? Has the deck/belt been replaced? If belt/deck was replaced, check controller and drive motor

precor 933i where are fuses My treadmill was running fine and then completely powered off. I have checked the wall outlet and that is OK. Took cover off and see that a DS3 led is lite. The fan is ...

Precor EFX 546i display is not working Troubleshooting Treadmill Control Panel Issues Green Fitness Company However test the voltage supply from Control Board Motor to the PCB console, by 8-12Vdc, if ...

...fuse is precor 932i treadmill Hi Wimbledon. see if this youtube helps you out. Treadmill How to Check and Replace Control Board Fuse or this link. Precor 932i treadmill where is the fuse Google ...