...chain on bike go to the middle of chain pull chain together once pulled kkeep held tight and try and pull chain at the rear sprocket if you can pull chain outwards then your chain needs replacing
Bike reving at about 4000 RPM tensioner sounds noisy Hi i had my tensioner replaced , when i fetch the bike it is quiet . If i do about 1000 km then it sounds like the tensioner is making a noise . ...
My Yamaha YZFR6C fell on its left side and the black circle part cracked and oil started leaking out. What is this part called so I can get it replaced? The chain sprocket has a black seal and the ...
hi please could you tell me what happend with my r6. i eas trying wheele when i work acelerate and cluth between the change gears 1 to 2 ,i know i did early ,usualy i do on firt gear or afeter change ...
i bought a 2003 R6 from this guy who said the chain broke on him. The bike only in neutral and first gear. i cant hift up from one to two or neutral to two. Plus I dont the clutch is engaging at all. ...
...chain is slipping off then catching and when it catches it jumps to a high rpm . whats the problem? It sounds a lot like 3rd gear and shift fork need replacing, it seems a very common problem on the ...
01 r6 I have noise in all gears I replaced my sprockets and chain on my 01 r6. I had never done it before and thought I knew what I was doing. When removing my front sprocket, instead of placeing a ...
Question about 2008 YZF-R6
how do I remove the chain from 2008 Yamaha YZF R6 without removing the swing arm I want to clean around the sprockets and remove the chain to clean properly, but I cant find a removable link. Is there
I have a 2001 Yamaha Yzf r6. It’s been making this crazy winding noise on the left side of the bike, I just took off cover and checked behind it where the stator is. After further listening closely it
Usually answered in minutes!
288 Questions
145 Questions
115 Questions
98 Questions
99 Questions