...Replace the wiper motor. Check the screw holding the wiper arms just grab the wiper arm and turn it on and hold it in the parked position and it should park there every time. The nut gets loose , ...
Question about 2001 L-Series
...wiper blades dont park at bottom of windshied when wipeing the blade covers to whole windshield from bottom thru full wipe--when turned off it parks at about 2:00 oclock--do i need a adjustment or ...
...wiper arms and the cabin air filter housing before you can get to it. then there are 4 screws that hold the blower in. once you get that out you will need to replace the connector for the blower. or ...
...wiper arm. The connection of the arm that moves should be checked for being at the correct angle for parking. Removal & Installation 2000-03 Wiper Motor and Bushing Replacement L4-2.2L (Vin F) ...
...replace anything. Your "eccentric" arm, that is directly connected to the motor, was reinstalled 90 degrees off. You need to unbolt the arm from the motor and rotate it 90 degrees to the proper ...
...wiper gear. Install a new wiper arm nut using the 3/8-inch ratchet and a metric socket. Replace the wiper arm nut cover. Test the wipers to ensure that they function properly. Thanks for using
Usually answered in minutes!
807 Questions
721 Questions
296 Questions
63 Questions
17 Questions