Questions & Answers for: Chevrolet Impala replace wiper arm

Question about 2005 Impala

4 Answers

...replace the wiper motor bracket. It will be necessary to transfer the following parts listed below to the new bracket. ^ Wiper transmission ^ Wiper motor crank arm ^ Wiper motor 1. Remove the ...

Ad

Question about 2003 Impala

2 Answers

replace bracket, big job) Then cycle the wiper and you will see the assembly return to park position. Re-install all parts in reverse order. Hope this works for you. Windshield wiper arms are about to

Ad

replace the wiper crank arm that is bolted to the wiper motor. Then you need to bend the tab back up that got bent on the wiper motor bracket that the old crank arm bent. The crank arm has to hit this

...the small nut at the base of the wiper arm (pivot area) came loose, if it doesn't have a nut to tighten with a wrench, the splines are stripped out and you'll need to replace the wiper arm

...wiper arms and plastic cowl to access the motor and either bend the pawl back, or replace it...once the arms and cowl are off, have a helper turn the wipers on, then off, you'll see the bent pawl ...

...wiper arm are still there if not you might need to replace one or both of the components,if they look good then reinstall the passenger wiper arm and make sure the arm is as close to the position of ...

replace the wiper arm. There is an excellent YouTube clip on this simple repair below. You-Tube video "b5mh-OrFdnc" placeholder (do not delete) You-Tube video "b5mh-OrFdnc" placeholder (do not delete)

Question about 2002 Impala

1 Answer

...wiper arm, pop off the plastic cover at the pivot point of the arm. Underneath, there is a nut. Loosen the nut a little. Wiggle the arm while pushing the arm down. Hold arm in place and tighten the ...

Question about 2002 Impala

3 Answers

...the switch is moved to off position. so one of the connector wires keeps power to the wiper motor whenever the ignition is on. There is a fault in your wiper motor, someone will have to replace ...

...off. turn ignition off if wiper motor is good it should put spline in off position and now all you need to do is replace wiper arms in the correct position they would be in when wipers are turned ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...