Questions & Answers for: Ford Focus replace oil pressure sensor 06

Question about 2000 Focus

1 Answer

...only do you here any noise when the light flickering if no noise probably just the oil light sensor the best thing would be to get that oil pressure check out hope it FIXYA our problem thank you ...

Ad

Question about 2005 Focus

1 Answer

...replace the mass air flow should this take care of problem? It might but what exactly are the codes. Before you change the Mass air flow sensor, try cleaning it first with a can of mass flow cleaner. ...

Ad

...OIL PRESSURE WHEN I STOP THE OIL LIGHT COMES ON get it inspected to make sure its full and get an oil service if its been awhile. If the light still stays on after you do this then you will need to ...

Question about 2001 Focus

1 Answer

..... that is actually your oil "pressure" light and if your engine is not running the sensor is telling the computer that there is not oil pressure. Once your engine is started then the light will go ...

...and such. You may also want to just inspect the wire that goes to the oil pressure sending unit and/or oil pressure switch, either loose or disconnected can cause the engine light to come on. good ...

Question about 2000 Focus

1 Answer

...out of a sensor on back of pump auto Part store can't find a sensor in there system what is it sensor caller ? Are you sure its on your power steering pump, and its not your oil pressure sending

...oil filter, air filter, tires are new. alignment is good. IAT sensor? MAF sensor? what can I do to get better mileage. I only get 200 miles from a full tank of gas on this pig. It idles a little high ...

Question about 2005 Focus 2.0

1 Answer

Replace an Oil Pan Gasket? http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-oil-pan-gasket.html ------------ HOW TO REPLACE AN OIL PUMP http://schematicsdiagram.blogspot.com/2011/07/how-to

...oil pressure sensor but traction control is not working This code is for tractiion control. Possible causes include:(could be other actuator, sensors,ect.in traction control)Failed Active On-Demand ...

oil pressure test done using a mechanical gauge that will determine if oil pressure sender unit is operational or not that will then decide if the oil pump is failing if the engine is original then it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Focus
2000 Ford Focus

3,749 Questions

2001 Ford Focus
2001 Ford Focus

2,612 Questions

2003 Ford Focus
2003 Ford Focus

2,055 Questions

2005 Ford Focus
2005 Ford Focus

1,226 Questions

2004 Ford Focus
2004 Ford Focus

897 Questions

Manuals & User Guides

Loading...