Questions & Answers for: Kia how to replace a lifter

...automatic valve adjustor not allow you to set the valve gap.If it is making bad noise then it needs replacement.When changing valve lifters, it is recommended that the lifters are allowed to ...

...lifter, you will have a constant tapping sound. I have used Sea Foam to un-stick lifters successfully. IMPORTANT NOTE: A WORD ABOUT THE REPLACMENT OF THE KIA RIO TIMING BELT. It is recommend that the ...

lifter noise after it worms up. put in new oil pump new berring mane and rod new oil filter new oil .no help! 3.5 Did you check the oil pressure with a gauge after the repairs, and did you replace the

lifters so you would have to pull the valve covers and use a feeler gauge to measure clearances and replace the tappets accordingly

How do I Replace or service the Hydraulic Lifters - and does the oil pump also need to be replaced ? Hot and cold , it sounds like the motor pings(old school description) - weather I've been winding ...

What do i so now? any help would be really appreciated Anytime headwork is done, lifters are to be replaced with new ones along with new pushrods if so equipped, and rockers. Valves must have been in

...to be replaced. I would recommend using someone who is qualified for the job. This isn't a skill level D job. the way to fix a lifter is to replace it. check the cam lobe for damage on that

On a 2005 Kia Spectra EX, 2.0L is the intake Lifters and exhaust lifters the same or are they different? Please Please HELP We have already taken the cams out and had the heads serviced to check for ...

Is the intake valve and the exhaust valve the same? Does it make a difference in the exhaust lifters and the intake lifters if you get them all mixed up when you put them back into the right holes? ...

WHEN STARTING KIA 2008 SPORTAGE A NOISE SOUNDING LIKE LOOSE BOLTS OR NUTS FALLING AROUND.LIKE SOMETHING KNOCKING AGAINST A COVER OR SO.GOES AWAY AFTERWARDS THEN COMES BACK WHEN IDLING .. hydraulic ...