...Replace the tray 2 lifter-driver assembly. See Tray 2 lifter-drive assembly. 5 Replace the dc controller PCA. See If you get into the printer and you see the liftter motor, it has a spring on the top ...
hp 4700n eroor 60.02 also makes clunking noise. replaced lifter no help Have you would try a different paper cassette. Usually that clunking noise is associated with gears not mashing. Is the lifter ...
...Replace the tray 2 lifter-driver assembly. See Tray 2 lifter-drive assembly. 5 Replace the dc controller PCA. See Dc controller PCA. This is straight out of the manual. Tray 2 lifter-drive assembly 1 ...
...Replace the tray 2 lifter-driver assembly. Test the printer. Replace the DC controller PCA. Test the printer. As noted by neerajswar, the error indicates a problem in one of the electrical components ...
lifter assembly to lift the tray check them for working if it works then go to next step.. clean the feed roolers & replace the paper seprator of the printor satuated on the end of paper feed tray
...a up and down motion, try and lift it gently. Either the lifter motor or main pca will need to be replaced if it doesnt dissapear. Some people have stated that it was a slight crack in the lifter ...
...paper lifter. Make sure the spring has not fallen off the lifter. You may need to replace the lifter. Also try lifting the paper deck by hand to make sure there is no obstructions in the tray
...not lifting and find "is there any kind of abstraction to lift the tray". Then just refix the tray lifter assy. connector otherwise replace lifter assy. hope it will help. try this Fix Error ...
...assembly -If the unit is still clicking/banging with a new lifter replace the tray -If the unit is still clicking/banging with a new lifter and tray see step 5 5 Replace the dc controller
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions