...lifter's on my truck just started to make some noise on the drivers side of the engine. it stops once the engine has been running at road speeds for a while though. how do i fix that? and what do i ...
misses when hot also lifters become noisy bought an 88 ford ranger it was running rich .So i replaced the plugs,wires,cap&rotor o2 also a used map censor.The oil was black and gassy replaced ...
...cleaner and change oil this often frees up stuck lifter, if still ticking then likely need to replace lifter, check pulgs and if plug from that clinder is darker then valve not opening need to ...
...replace the cam and lifters? Yes you will need the following: Cam Lifters Assembly lube Water pump gasket Intake gasket Timing cover gasket Lifter removal tool Puller for harmonic balancer Cam ...
...it from returning under spring pressure. (In which case you should probably replace it.) Some new lifters are very soft before the engine is started and the lifter has had a chance to "Pump
...replace one lifter you should replace all of them. The ticking could be the cam phasers. The 3rd valve is oil pressure actuated. There was a TSB for this, along with the injectors on the 04-05 MY ...
...make sure the nut is tight on the rocker arm. If it still taps, the lifter has failed and must be
...from square block one on the proper pro ceders on setting the lifters and torque order of lifters and tappets I WOULD REPLACE THE LIFTER AND PUSH ROD.WHAT SIZE ENGINE YOU HAVE 1.8L OR 1.9L
...replace hydraulic lifters with solid ones to suite my camshafts Cut/machine them from a hardenable billet and make sure to provide oiling to the valve train to accomodate the changes to the oiling ...
replace lifters for solid lifters zetec ford want to replace lifters for solid ones can i machine lifters to put instead of the hydraulic lifters i ve got a racing engine with 317 degrees camshafts ...
Usually answered in minutes!
3,749 Questions
2,998 Questions
2,612 Questions
2,348 Questions
2,636 Questions