Questions & Answers for: Optoma replace lamp

...replace the fuse thats on the little board beside the new lamp. that will reset the buld to new. I understand that the fuse will blow right after a new lamp is installed. It will reset the counter to ...

...goes out. Hi SoonerJDP This is indeed a warning that the hours on the lamp has been used up and that you will have to replace the lamp. Remember to reset the lamp timer once you've replaced the

My Optoma HDTV Model RD50 needs replacement of its internal lamp. Which model lamp is the correct one and how much does the lamp cost? Regards - Lee Call Optoma technical support listed on the ...

...follow to replace lamps in projector if not you might miss it. First you must confirm that the lamp is OK from the vendors you purchase before anything. Bye. [email protected] Aniekeme Anthony. ...

...replace the lamp driver. I purchased a spare lamp with my original purchase. I had the exact same experience as you at around 1200 hours on the lamp in ECO mode. I used the spare lamp. Same thing ...

...unplug any other cables and label them in order to restore them in the right way once the lamp is replaced. 2:In order to see the lamp, remove the access handle on the outside cover. You may need

...replace the lamp, you need to reset the lamp counter as well. The procedure for this should be in the owner's manual. This counter is a guide only. Lamps have an expected lifetime and the message ...

...replace the lamp i unplugged it and when turning it back on to work - it does not start , it`s dead the green led lamp does not flicker , does not work looks as if the power suply gave up on me . is ...

Our projector indicates that the light bulb needs to be replaced after replacing the light bulb once it still indicates that it needs to be replaced. This is the excerpt from the manual on how to ...

...is for the user manual of optoma hd-81 and the procedure to replace lamp is mentioned on page number 59.Please read the instructions before replacing lamp.----------- This will