Question about Stylus RX500 All-In-One InkJet Printer
...ink pads need replacing, but that it is a big job to repair. I have learned that it is just a case of replacing the ink pads and the gasket benieth the main ink pad. I have cleaned up the ink pads, ...
...Replace pads. Make sure pads are fully seated. 2. To reset waste ink counter: Press Menu-Scan-Copy-Scan to enter service menu. Use arrow keys to scroll to ?Service menu counter access?. Press OK. Use ...
Question about i9900 InkJet Photo Printer
...ink absorption pads cannot be emptied, only replaced. Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you. Once they are replaced, it'll ...
Question about i9900 InkJet Photo Printer
...REPLACE WASTE INK PADS WHERE ARE THE WASTE INK PADS IN THE RX560 HOW DO I GET TO THEM TO WASH THEM THANKING YOUW The ink pads are not washable. You have to replace them. Then log on to epson.com/ipr ...
...from head cleaning and ink charge. Next, you need reset waste ink counter, and replace or washing pad. You can extend outlet pipe to outside of printer, so next time you don't need replace pad
...replace the ink pad with a new one. You can get these pads from a place called pudsey computers www.pudseycomputers.co.uk There is no easy way to remove and replace the waste pads on this model (or ...
...pp-100 ink pad reset I'm getting the message "Ink Pad Nearly Full". How do you reset the ink pad counter? You have to replace the ink pad assemble to reset it. You can reset PP-100 by WIC ...
...replace it. "Ink Absorber Pad Full" The error "Ink Absorber Full" means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period ...
Replace the Ink Pad: If your printer is within warranty or covered by a service agreement, contact Epson to arrange for the ink pad replacement by a qualified technician. If it is out of warranty, you
Question about Printer
...replace the waste ink tank/pads: Turn off the printer and unplug it from the power source. Open the printer cover to access the ink cartridges. Gently push the print head to the right to move it to ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions