Questions & Answers for: replace gas tank 03 cavalier

Question about 1991 Cavalier

1 Answer

...float. Any suggestions. Bad ground on sending unit or bad sending unit. The sending unit is located in the gas tank and is inserted into the top of the tank. The tank needs to be removed from the

Ad

...gas gauge is all the way to the left beyond full when i know i only have half a tank. This has been happening for a while and now all the gauges will not go back to where they should be. Please help! ...

Ad

Question about 2005 Cavalier

2 Answers

...in the tank, did not resolve the issue. http://almostgonesblog.blogspot.com/2010/03/repairing-instrument-cluster-on-2005.html. I hope this helps, seems like alot of problems with the dash

...replace fuel filter on 02 cavalier but can not locate it . it is located directly behind the gas tank, way up against the floor. The filter is under the car, I think its back behind the gas tank if ...

Question about 1998 Cavalier

1 Answer

98 cavalier gas reads wrong mostlikely its the fuel sending unit, which is an assembly in the tank with fuelpump. you have to drop gas tank to replace this unit.

replace a broken fuel gauge on '03 Chevy Cavalier? The one in the dash or tank? In the dash its a two hour job, @ $75 an hour. If its the sender in the tank, its a four and a half hour job @ same rate

...gas gauge isnt working. It mostly points to full even when it's not and it never goes all the way to empty even when it is. What could be the problem? you have a bad sending unit ,its inside the fuel ...

...gas i have. This is common on the 03-05 Cavalier instrument clusters, it's caused by failing stepper motors on the cluster's circuit board and can be fixed. Check out this site for more on how to get ...

...gas tank with a 2 x 4, while someone tries to start the car........if it starts, replace fuel pump and filter! it's the good old W.V. TEST!!! yet it works. I had this problem in March, and it was the ...

Question about 2003 Cavalier

1 Answer

replace your gas cap or check to see if it was tight. It may take a few trips with the fault fixed to extinguish the light and more to get rid of the P0440 code in your computer. Removing the cable on

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...