Questions & Answers for: replace fuser

...If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller

...If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller

...If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller

replace the fuser. part number rm1-3740-030cn Check the fuser. Beside the fuser, also check the gears that connects to the fuser. You may put some grease to lubricate the gears. Please note that fuser

...If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller

...If there is not continuity between the fuser connectors neutral and hot with the fuser removed, replace the fuser. If the problem is not related to the fuser, replace the engine controller

...replace the fuser. 3. Faulty DC controller PCB. Replace the DC controller PCB. 50.2 error - Fuser Failure (Abnormal Warmup). Perform the following steps: 1. The connector between the fuser and the ...

...Replace Fuser'. The printer may not print until the FUSER is replaced. IF you put a fuser that has been pulled from another printer, it may be a 'ship-with' fuser and have no chip of its own, so the ...

...4. Remove the fuser. 5. Measure the resistance between fuser connectors J6007LA-2 and J6007LA-3. If the resistance is not 100 kohms to 3 Mohms, replace the fuser. 6. Replace the DC controller

replace fuser kit, it was replaced and still has the same message This is an easy one. The original fuser supplied with the printer DOES NOT have a counter chip. Instead, the PRINTER assumes that when