Questions & Answers for: Chevrolet Tracker replace fuse

Question about 2000 Tracker

1 Answer

2000 tracker ac trouble 2 weeks ago replaced ac compressor, yesterday ac stopped blowing cold what has happened? check the fuse. I had the same problem 2 summers ago. I checked the fuse myself, and ...

Ad

Question about 2000 Tracker

1 Answer

lights and door locks don't work Do I need to replace something? I figured since both don't work they must be on the same fuse. Where the heck is the fuse box? look under the hood

Ad

Question about 1999 Tracker

2 Answers

...hi. my 1999 chevy tracker 4wd manual blows the turn sig. fuse each time i shift in reverse. ive replaced all bulbs(int./ext.), the rear backup switch under the shifter, and replaced all fuses ...

Replaced blower motor, but still blowing fuse, 2001 ChevroletTracker/Suzuki Replaced blower motor, but still blowing fuse, fuse was lasting a couple of days now blows as soon as installed. started ...

Question about 2001 Tracker

2 Answers

...out what fuse it should be go from there. Good luck Rule of thumb is, no dash light (no tail light)....look in you fuse box for the tail light fuse and replace it...that should solve your

the instrument panel light fuse blew, replaced it and it blew again, what causes this Possible overloading try to put a different fuse like if you have 15 amp try 20 amp fuse let me know if that solve

...replace fuse 19 or do i have to replace the entire fuse box thats under the hood? its the black 80amp fuse thats is smashed. Take off the negative battery terminal first. Use pliers to pull the fuse ...

...replace the fuse the lights go on but the within minutes the lights go out again and won't go back on. you have a short to ground or accessories like bulbs or other circuit on the same fuse take more ...

...hood fuse box and look for the ECM fuse. Remove it and see if it has blown , replace if necessary. If the fuse is not blown, check other fuse for blown condition such as ignition fuses. Good

...fuse, replace the backup fuse or reverse fuse. easy huh. if both lights are out , are they? then check the voltage out of the trans reverse switch . 12vdc in but 0v out is a bad switch in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...