Questions & Answers for: Pioneer replace fuse

Question about SD-643HD5 64" Rear Projection Television

4 Answers

...replace the fuse, turn off the standby power switch on the front. Unplug the power cable. Open the back panel. All logic and power modules are on the bottom of the cabinet. Therer is a large power ...

Ad

Question about SD-P55A3-K 55" Rear Projection Television

1 Answer

blown 4 amp fuse twice TV would click on/off no picture. replaced the 4 amp fuse Tv worked for 2 weeks , replaced 4 amp fuse again and this time TV did not come on. ok appaloosa! is the fuse blowned ...

Ad

Question about SD-533HD5 53" Rear Projection HDTV

1 Answer

Replaced fuses & they keep blowing We replaced the fuses in our tv because it would come on ( green light ) & go right back off. Then we replaced the fuses & it worked.Then we turned the TV off & it ...

replace this fuse? There are actually two fuses on the smps F201 (6.3a) & F202 (5a) if either or both of these are open the problem is not likely the fuse. What I try and tell customers is that a fuse

Question about CDJ-200 CD Player

1 Answer

...replace the fuse on the units if that is the case? It is hopefully just the fuse. To get at the fust you have to remove the casing (there are screws on the under side). Once removed you will find a ...

...fuse is 10k The PCB has a warning Caution: Replace IC links as marked manufactured by Littlefuse Inc I am guessing that finding replacement fuses and replacing them will fix the problem I must agree ...

...replace a fuse either you have a short OR the fuse is a generic one------replacement fuses from say Radio Shack will even if correct amperage and voltage blow for no reason-----most of the fuses in ...

Question about PRO-520HD 53" Rear Projection Television

1 Answer

...replace the fuse and it blows again, you've got a much bigger, more expensive  problem. Be prepared to pay as much or more to a repair shop than the unit is worth. Be prepared to have a ...

Question about PRO-520HD 53" Rear Projection Television

1 Answer

...I replaced the 1.25 fuse, plugged it in and it blew the replacement fuse. This unit has sentimental value and I do not want to replace it or get rid of it. This must be caused by faulty audio. ...

Question about VSX-305 Receiver

1 Answer

...and my pc. While using the 8 ohm sub the 6.3 watt fuse blew and the receiver wouldn't power on. I replaced the fuse with a 6 watt one and as soon as I turned the power on It blew Instantly not even ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pioneer Televison and Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...