Questions & Answers for: Kenmore replace fuse

Question about Kenmore Dryers

1 Answer

...fuse. 3. Igniter Igniter may burn out or break. Replace the igniter if found defective. Note: Igniters are very fragile and break easily. It is recommended to handle the igniter only touching the ...

Ad

Question about 63942 Dryer

1 Answer

...fuse. 3. Igniter Igniter may burn out or break. Replace the igniter if found defective. Note: Igniters are very fragile and break easily. It is recommended to handle the igniter only touching the ...

Ad

Question about 63942 Dryer

1 Answer

...fuse. 3. Igniter Igniter may burn out or break. Replace the igniter if found defective. Note: Igniters are very fragile and break easily. It is recommended to handle the igniter only touching the ...

Question about 63942 Dryer

1 Answer

...fuse. 3. Igniter Igniter may burn out or break. Replace the igniter if found defective. Note: Igniters are very fragile and break easily. It is recommended to handle the igniter only touching the ...

...replace the fuse. How do I know which to replace? Most dryers have a thermal fuse, which burns out when the dryer overheats, in which case the dryer will either not run at all or stop heating. The ...

...fuse eletrical panel first at your house. if all the fuses are on then you are good. it looks like the tech replaced your thermol fuses, they might be bad again. you might have to have your element ...

Question about 77082 Gas Dryer

1 Answer

to your dryer. set the screw aside and discard the broken thermal fuse. replace the thermal fuse screw to attach the new replacement thermal fuse to your dryer. reconnect the wires to the thermal fuse

Question about 63952 Electric Dryer

1 Answer

...replace your dryer's thermal fuse. The wires leading to the thermal fuse are connected using metal slip on connectors. Remove the wires by pulling on the connectors, and not the wires themselves. ...

Question about 63952 Electric Dryer

1 Answer

...is it 385.19233400 The error code 1 indicates the fuse on the A board has blown. The fuse should be replaced with a part number 000182177 fuse. The original fuse is a 2.5 amp fuse and the replacement ...

Question about 63952 Electric Dryer

1 Answer

...wires that go to the fuse together and running the dryer. if the dryer heats up when you bypass the fuse then replace the fuse.if it does not heat with the fuse bypassed then replace the heater ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Kenmore Dryer Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...