...belt etc. You didn't say whether it drained out OK or specify what model but it sounds like the brake is stuck or there's something caught in the basket. Try turning the main drive pulley (the one in ...
...has failed. belt is worn and slips on the pulley drive for the agitator process. Additionally, clothes are not spinning out as dry as they used to again identifying the belt needs to be
do i replace it? Easy,It just slips over the fluid drive after disconnecting the link to the spin solenoid, then on to the pump pulley. Adjustment is made by the motor mount.adjustment bolt. Good luck
...drive belt broke and I need to replace it. How do I remove the outer metal cover to get to the working parts there are 2 5/16 screws located at the bottom of the front panel. Remove the screws and ...
drive belts for wear and replace them if necessary. It is important that the belts have neither too little nor too much grip. If they are fine,then check the bearings of the motor and the drum. Lastly
drive belt in good condition? Does the machine spin dry? Is there water leaking from the bottom? I suggest the gearbox needs to be replaced. Another sign is if the machine is noisy when it is washing
Question about Clothes Washer Agitate & Spin Belt - 200923
...drive pulley of the agitator and also locate the belt tensioner which is a small pulley pressing against the belt under tension of a spring hook onto it. Pull and keep the tensioner away by hand to ...
Question about Clothes Washer Agitate & Spin Belt - 200923
...replace a washing machine belt can be tricky, but will save you from.... specifics of the location and method for removing and replacing the drive belt. ...your washing machine, then your model has ...
Question about Queen AWS45NW Top Load Washer
...road for normal use ? That unit came out in 2006 it is still being sold. Motor and transmission are most common failures. The cost is 250 to 300 the most replaced item is the drive belt for 30 ...
Question about Queen AWS45NW Top Load Washer
...drive belt is broken or loose, replace it. Check the motor control board for burned out components. Here is a full list of things that could prevent spin. ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions