Neff combi blown diode. Found blown 10a fuse blown on display pcb.Replaced fuse but found blown diode on mircowave power supply.Dose this mean the microwave unit is blown or is it worth replacing the ...
...the same problem. As long as you replace it with the same capacity of diode and there is really a diode in the wiring harness and you did not reverse the connection of the diode, then your are
...replace the diode and make disk functional? if so can you please suggest me the part number of the diode? Thanks in Advance.. Kantesh Kudapali Hi there! I think it's not possible to replace the diode ...
Question about HH9485 - Drop in Charger Fits the HH940, VHF Marine Radio
...replace the diode on a 4.8 volt NiCad 400m rechargeable I'm rebuilding a discontinued two way radio battery and I believe the diode is fried. I get 4.8 volts before the diode and nothing after the ...
...cathode. The kathode is marked by a line painted on the body of the diode so replace it so that the line marking around the Diode is put into the position of the minus ( - ) mark on the printed
...replace the diode, but need specifications on what to buy, assuming the parts are available at a local store. Hello, Most HV diodes have press fit (Fast-On) or ring lugs so replacement is very ...
...replace that diode as this radio is not stock with talkback. Someone removed that diode. Diodes only go in one way. Pay attention to the cathode marking on the board and on the diode ( --> ) no ...
...and a cathode. on one end of the diode,the purpose of the diode is to limit the voltage.If you are replaceing the diode in the alternator it is shape one way,just unsolder ...
Question about TR-966 CB Radio
...to the high running voltage and the potential for electric shock, it is extremely dangerous to replace the electronic components in a microwave. Only a licensed technician should replace the
Usually answered in minutes!
3,405 Questions
567 Questions
285 Questions
308 Questions
275 Questions