Questions & Answers for: Ford Explorer replace bulb headlight

Question about 1997 Explorer AWD

1 Answer

replace the bulb and you touch it with your hand be sure to wipe the bulb off before installing it in the headlight assembly because it the sweat on your hand that can blow the low beam also make sure

Ad

i have parking lights but no headlights i have replaced the bulbs and the fuses r good the headlight switch is getting power but i still have no headlights? I have a 96' Explorer same problem . new ...

Ad

replace the bulbs? thx. actually you do not pull off the headlight. Pop the hood and look behind the headlight and the bulb will twist in and out. You may have to remove battery to get to one of them.

Question about 1998 Explorer

1 Answer

replace the headlight bulbs in my 1998 ford explorer? Review this guide... Fig. 1: Examples of various types of automotive light bulbs Fig. 2: Exploded view of the front headlight assembly and related

Question about 2002 Explorer

1 Answer

...headlight, you will see a connector which you can twist a quarter turn and remove the connector and bulb. Then you unplug the bulb, and get a replacement. DO NOT TOUCH the glass of the replacement ...

...Right low beam headlight out. Tried replacing bulb. Still won't burn. New bulb is good as I tried it in the left light which is working. id be checking the fuses as they are run on seperate

Question about 1997 Explorer AWD

1 Answer

...headlight bulb, retainer and wire harness plug Open the vehicle's hood and secure it in an upright position. If necessary, open the bulb access panel by depressing the latch then lifting. To remove ...

Question about 1997 Explorer AWD

1 Answer

...headlight switch which is not selecting the low beams. Fuses are easiest to check, and there is probably one for each light. Bulbs are a bit trickier and really need a continuity tester to check, or ...

...headlight relay for 1991 ford explorer I only have high beams and no low beams on both headlights The first thing is to make sure the bulbs are good, if the low beam bulbs are bad the high beams will ...

...replace socket) Can Also Be Caused By Wrong Bulb Installed. Visually Check Bulbs for Filiments Touching and or Wrong Bulb--Then Check Rear Ground Problem By Removing Bulbs On One Side ( taillight) At ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Explorer
1998 Ford Explorer

2,998 Questions

1996 Ford Explorer
1996 Ford Explorer

2,307 Questions

1999 Ford Explorer
1999 Ford Explorer

2,248 Questions

2002 Ford Explorer
2002 Ford Explorer

2,302 Questions

2004 Ford Explorer
2004 Ford Explorer

1,513 Questions

Manuals & User Guides

Loading...