Questions & Answers for: Kia replace bulb headlight

replace a blown headlight in a 2005 Kia Sedona van? There are 3 or 4 bolts on the headlight housing that you have to remove first. Then pull the whole light assembly out from the front of the vehicle.

...bulb and replace same manner. Also note if the light bulb is on the passenger side will possibly have to remove the windshield washer water holder, on the drivers aide the battery will have to come ...

...Replace the old headlight bulb with new bulb. Secure it by sliding the metal clip up to hold the bulb in place. Reattach the electrical cable and replace the round knob to the back of the headlight ...

...REPLACE THEM, ALTHOUGH IT WOULD BE ODD THAT BOTH LOW BEAM SIDES OF THE BULBS WOULD BE BAD, ALSO CHECK YOUR FUSE BOX AND LOOK FOR THE LOW BEAM FUSE, MY SEDONA HAS ONE, YOURS MIGHT HAVE FUSED OUT I ...

...cap for the headlight is removed you must also unlock a spring mechanism and then you will be able to access the headlight socket to replace the bulb-bulbs are fairly priced and most auto parts ...

...it completely from the van. Remove bulb socket, spring clip, and busted bulb and replace with new one. Reassemble the disassembled parts in reverse order. That's it, will take you only 10

...BULB REPLACE IT WILL SHOW YOU HOW TO REPLACE HEADLIGHTS BULBS BULBS ARE HALOGEN YOU NEED TO USE CLEAN LATEX GLOVES WHEN HANDLING AND REPLACING BULBS BECAUSE OIL FROM YOUR FINGERS OR HANDS WILL CAUSE ...

good then replacing headlight bulbs to both headlight assembly is your next step.If after replacing both headlight bulb you still have the same problem then you might have other electrical issues

...replace the bulb again check for broken wires or the correct bulb You have to check the specific side headlight holder and the side wiring harness or electrical connection. ...

...hood at rear of headlight. Gently depress clip and pop open cover. The rear of the bulb housing will pop out when you turn and pull. Replace bulb and reverse actions to reinstall. Hope this