Questions & Answers for: replace bobbin

bobbin or replace it with a wound bobbin - make sure that the bobbin thread is threaded down the slot in the case and behind the tension spring, also the bobbin should turn clockwise when you pull the

...replace the bobbin casing. A diagram of some kind would be extremely helpful. Can anyone help me ...! slide de bottom windor under the foot and remove the bobbin casing, the bobbin shoud be inside. ...

...it's possible that the bobbin case did not get inserted correctlyor  it's also possible that the bobbin case needs to be replaced, I've had to replace the bobbin case on one

...case is inserted correctly in the machine it's also possible that the bobbin case needs to be replaced also check the bobbin it could be warped it's also possible that the timing needs to be ...

...but then it goes UNDER the bobbin holder and bunches up/jams machine. I've cleaned/blown/brushed/replaced bobbin/replaced needle/replaced foot and it still keeps jamming up. I have pics, if there ...

...correctly. It seems that the bobbin is 'jumping' and the bobbin thread is tangled. I've cleaned, replaced the bobbin, replaced the needle, and re-threaded the top but nothing works. It will sew OK ...

...intact and in place. It makes a terrible racket. Do NOT oil!! You need to have the bobbin case replaced. I had mine replaced under

...force to remove the bobbin. It may damage the bobbin and, possibly, the bobbin case. They are both replaceable. Or you can pick up an additional bobbin case and bobbin and try the new ones in your ...

Replace bobbin case for older Super Elna sewing machine Elna Star 62 Sewing Machine Parts / SewingPartsOnline.com https://www.sewingpartsonline.com > ... > Elna Parts > Star 62 (SU) $43.19 Bobbin Case

...Replace needle if in doubt. Be sure the bobbin is properly loaded onto case. Only use the bobbin designed specifically for this machine. Be sure the bobbin thread is captured by the bobbin tension ...