Questions & Answers for: Toyota Tacoma replace 80 amp fuse

...80 amp fuse in my truck.  I replaced the amp.  Now since the fuse was replaced all of these things have happened..please help.  Any clues???  It turns over with fire but no ...

Ad

how to remove fuse panel from fuse block on 2007 toyota tacoma trying to replace 140 amp alt fuse TOYOTA TACOMA SERVICE REPAIR MANUAL 1999 2000 2001 2002 2003 2004 2005... get your car fix right now

Ad

Question about 2007 Tacoma

1 Answer

how to remove and replace 80 amp alternator fuse it depends on what type of vehicle you have make year model please and ill tell you

Question about 1998 Tacoma

1 Answer

...amp fuse missing from his box. The truck is running sluggish. He cannot replace the fuse because he doesn't know what fuse it is. Do you have a copy of the fuse box for this model year? the green 30 ...

Question about 2002 Tacoma

1 Answer

amp altenator fuse and the fuse for the dome lights. Not only would the truck not start but the radio and none of the accessories are operative. i replaced the fuse for the dome light but have not yet

Question about 2002 Tacoma

1 Answer

...replace the fuse. Can you help? most cigarette lighters use a 10 amp fuse. if the fuse blows, or the lighter does not work, remove the fuse immediately, and have the car checked by a qualified auto ...

...Amp AC Fuse in Engine Compartment Fuse Box but no change. I have pulled the harness at the fan motor and it looks normal, no burn marks. Can I eliminate any suspect parts: Fuses, Switch, Relay, ...

Question about 2004 Tacoma

1 Answer

& Dash lights Both the taillights and dash lights will not work. All the fuses were blown--then replaced. Cannot get the car out of park and the taillights and dash lights still do not work. I had

...fuse & the window stated going down. Now the other windows work, however the drivers window will not go back up. 30 Replaced 30a windows fuse- all windows now work except the drivers window. ...

Question about 2006 Tacoma

1 Answer

amp or amp fuse. No amp. Replace the radio, unless you are a computer tech. Then tear it apart and find the problem. Could be bad solder joints. The most likely cause. Usually at the face of the radio

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...