Questions & Answers for: Ford Mustang removing

Blower Motor for 89 Mustang How do I replace an A/C blower motor on an 1989 ford mustang i've replaced three heater cores on a mustang, the only way to get to them is to remove the dashboard i believe

way keeping you from removing to filter if that is the case, #1 you can either unbolt the bracket to help lower it enough to remove the filter or #2 simply pull down on the bracket to bend it slightly

what is the proper way to check compression on a 1970 302 V8? I have been told to pull all the plugs and then check and I have been told to pull 1 plug at a time to check and then reinstall the plug ...

Looking for the easy way to rsplace oilpump on 1978 mustang 50 gt Remove engine. Remove oil pan. Remove oil pump. You have to remove the oil pan, if the cross member is in the way loosen up the motor ...

I have a 99 mustang cobra and changing the clutch. I am stuck on taking the bolts out of the bellhousing. How many is there and what is the best way to get them out? there is six bolts holding the ...

...removing dash or pulling it back to get to heater core If it does not have air conditioning you can pull the heater core out through the glove compartment. But it sounds like you do have air ...

removing the headrest on a 2000 ford mustang gt 1. Lift headrest and headrest support bars trim all the way up. 2. Insert tongue depressor (or slim jim) down the front side of the headrest bar. Push ...

pulled #7 fuse form under the hood counted from wheel toward engine. took care of the short , but wont let me go through the gears , so tied down the sift lock works but wont let me take key out of ig

what is the best way to remove the oil pan while in the car on a ford mustang 2001? is there a easy way to remove oil pan from a mustang with motor in the car? Robert, it all depends on your ...

how do I move the transmission dip stick out of the way so I can remove passenger side vavle cover there is a bolt on the dipstick,remove it and twist the dipstick out of the way.