...Shipping bolts or braces are still in the washer. Remove 3 shipping bolts, 3 yellow spacers and 3 metal "P" clamps from the back of the washer. Remove the access panel from the front of the unit and ...
shipping bolts need to be installed: two longer ones on the bottom and two shorter ones on the top. Each shipping bolt consists of a metal screw inside a plastic cylinder which fits between the washer
Shipping bolts for Maytag Neptune Where can I get the bolts to secure the drum for shipping? We're moving from one house to another. The installer did not leave the bolts after installation. Maytag ...
Question about LWHD2400HR Wall/Window Air Conditioner
...(did the instructions specify removing a shipping bolt?) sometimes units are shipped with a bolt to hold the compressor down that has to be removed. If not, I would return it where I bought
Question about LWHD2400HR Wall/Window Air Conditioner
...shipping bolts are taken off and if they are you probably arent totally level but it sounds like the shipping bolts are still on there and that wont let the dryer level like its supposed to the bolts ...
...shipping bolts. I assume you have a front loading washer. The tub is secured by bolts during transport. Then they have to be removed so that the washer will operate properly without damaging the ...
...shipping bolts removed? All four (4) shipping bolts and the plastic spacers must be removed from the rear of the washer before you operate it. Each unit is shipped from the factory with four bolts, ...
cant reinstall shipping bolts To reinstall shipping bolts the tub assambly needs to be pushed down,to do that may need to remove top and one person push down tub while one reinstalls bolts
...shipping bolts removed? All four (4) shipping bolts and the plastic spacers must be removed from the rear of the washer before you operate it. Each unit is shipped from the factory with four bolts, ...
Question about WF337AA Front Load Washer
...shipping bolts been removed? This error code indicates that the motor is having difficulty turning. All four (4) shipping bolts and the plastic spacers must be removed from the rear of the washer ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions