Questions & Answers for: removing platen

...platen is situated before removing to make sure you put it back on the same side of the typewriter. Squeeze the V clips and pull the platen up and out. When re-installing, make sure the metal paper ...

The platen does not turn to advance the paper to the next line when typing so each line is just typing over the next. Remove the platen by squeexing the black plastic retainers at both ends of the ...

how to remove the cover from an IBM selectric. IBM selectric , how to get the cover off? First remove the platen. There is a lever at each end of the platen push them down and remove the platen. Then ...

Need to remove the Platen to remove paper. I noticed that there are labels stuck under the platen on the silver paper level. I have not been able to remove the platen. Any suggestions????? We have the

NEW PLATEN FOR TALLYGENICOM 6312 I WANT CALIBRATE A NEW PLATEN SENSOR OR THE OLD, what is the methode? I would recomend you ensure the printer has the latest firmware as the way the pritner deals with

Procedure for replacing platen on QS-900 Want to replace the platen on my black and decker QS-900 palm sander. I have the replacement, removed the bottom screws, and cannot remove the platen. What am ...

gx 6750 carriage daisy brogham The paper is not feeding mechanically or automatically. It goes under the roller/platen only when I release the paper release leaver. The platen moves only about 180 ...

how to remove platen On both ends of the platen there is black plastic latch squeeze them and lift out the platen. DickyO

my canon ir1530 says platen cover is open what do i need to do my canon ir1530 had paper jam i open it and remove the paper and after setting back it says that platen cover is open. i dont even know ...

How do you remove the platen? the remove by various methods, you will have to remove the covers each end of the platen will be caller holding platen in place. ...