Questions & Answers for: removing a lens

lens opens from the rear. The trim ring inside the mount must be removed and the electronic connector separated from the mount by removing the 2 small screws at the mount edge. You can then remove the

I have a canon AE-1. Cant get the red dots to line up to remove the lens. The red dot on the lens itself will not move, am I missing something? Colleen To remove the lens, depress the the small chrome

I have a hair inside my lens. I have read that an Expert advices to remove the lens an remove the hair. But how can i remove the lens of my FZ-7 ? You can't. Your camera is not a DSLR with removable ...

I inherited a nikon d 40, It has a polarized lens installed on the regular lens, I wanted to install a wide angle lens that I got and I dont know how to remove the polarized lens to do that. It just ...

how do you change the parking lights Signal and Marker Lights REMOVAL & INSTALLATION Front Turn Signal and Parking Lights 1991-96 MODELS Remove the lens upper retaining screw and the fender side ...

How do I switch the lens on my Olympus evolt e500 1. Switch off the camera 2. Prepare the lens you want to put on 3. Remove the rear lens cap by turning it anticlockwise 4. Put the camera in your left

...removing all dirt and dust particles first could destroy them. Gently remove all traces of grit, dirt or dust particles from the lenses using a soft lens brush or canned air specifically designed for ...

...the camera are dirty. Depress and hold the lens release button and rotate the lens back and forth about ten times without actually removing the lens. The friction between the contacts will clean

...the inside of the lens you can't remove it. It could be molt and will eat its way through. Where the molt is, the coating is gone, so removing it, will change the characteristics if the lens

How do I replace the rear blinker? The lens needs to be removed. Look behind the trunk liner/carpet covering the access to the retainers holding the lens in place. Remove the retainers ( could be ...