Questions & Answers for: removing the catalytic converter

...catalytic converter welded on or clamped on? How difficult is it to replace yourself? I have an engine light on with error saying catalytic converter is out. Could it be just the sensors and should I ...

Ad

Question about 1998 Wrangler

1 Answer

catalytic converter Need guidance on replacing the catalytic converter on 98 Jeep Wrangler HI, this guide will help you with this replacement. Step1 Lift your jeep. Unfortunately, the catalytic ...

Ad

...catalytic converter down pipe-to-front resonator clamps and separate the front resonator from the converter down-pipes. Carefully lay the free laying exhaust on the ground. ______________________ ...

...removing the catalytic converter to see if the restriction is too much. should start if the converter is restricted. if it doesnt maybe its whatever caused the converter to go bad in the first ...

...catalytic converter, are the flange bolts welded and can i cut them Catalytic ConverterRemoval & Installation2.2L EngineTo Remove: Catalytic converter 2.2L engine Raise and safely support the ...

...catalytic converter is malfunctioning (plugged) is to remove it and check the change in engine performance. When a clogged converter is suspected, some mechanics temporarily remove the O2 sensor from ...

Question about 1989 Dakota 2WD

1 Answer

...Catalytic Converter Before removing any component of the exhaust system, always squirt a liquid rust dissolving agent onto the fasteners for ease of removal.. Raise and support the front of the ...

...catalytic converter meet threaded on both the exhaust and the catalytic converter, or does the bolt just go through both and have a nut on the end? I'm replacing the catalytic converter on mine ...

...catalytic converter by a reputable technician. A clogged catalytic converter results in a loss of power. The catalytic converter is made of an aluminum oxide honeycomb coated with platinum and ...

...Catalytic Converter and Engine mountes to get to the Starter. This is the procedure Disconnect and isolate the negative battery cable. Remove the catalytic converter (3) See: Engine, Cooling and ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...