Questions & Answers for: GMC Jimmy removing axle

Question about 1998 Jimmy

2 Answers

gmc jimmy how do i get rear axel out to change bearing? JACK UP VEHICLE, BLOCCK OTHER WHEELS. REMOVE DIFF. COVER & PLACE VEHICLE IN N. USING A BOX. END 8MM WRENCH; ROTATE DRIVESHAFT TO YOU LOCATE ...

Ad

how do take out the cv joint on the front axle of how do I take out the cv joint on the front axle of a 1997 gmc jimmy ...it can't be pushed out towards the engine...don't want to remove the pitman ...

Ad

How do I remove the rear axle to replace the seal 1996 jimmy How do I remove the rear axle to replace the seal on a 1996 gmc jimmy You will have to remove the differential cover on the rear end, in ...

...removing the axle put the bearing in an oven at 350 degrees (wear gloves when getting the bearing out) Quickly remove the axle and then remove the bearing and immediatly install the bearing it should ...

how to get the rear wheel bearing out of 99 gmc jimmy Dear Jimmy, This repair is an intrusive repair if you have never done it.A chilton's manual can be purchased at your local auto parts store for ...

Rear axle removal ? i want to take to replace two broken lug nut bolts to remove the rear axle you will need to put the rear of the jimmy on jack stands off the ground and remove the wheels then ...

...removing the U-bolts to keep the axle from suddenly dislodging. Remove the rear wheels and drums for clearance and to remove some weight from the axle housing. If equipped, remove the axle vibration ...

Question about 2000 Jimmy

1 Answer

How do I remove the rear axle The rear axle shaft?? Or the entire axle? I'm going to go with the axle shaft. Secure the vehicle. Loosen the lug nuts. Jack it up. Take the wheel and tire off. Remove ...

Question about 2000 Jimmy

1 Answer

axlerear how do you remove the rear axle shaft i cannot find the bolts that hold the axle shafts it has a limited slip dif. thanks remove the rear wheels and brakedrums or calipers and rotors ...

How do you pull a 1979 gmc jimmy 4x4 rear right axle Remove diff cover turn 3rd member until you see spider gear pin set screw, remove set screw pull pin push axle inward until c ring is visible ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 GMC Jimmy
2000 GMC Jimmy

1,363 Questions

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

Manuals & User Guides

Loading...