...Remove trim plug to expose the access hole in the trim panel. The access hole is located on the inside of the liftgate. 2. Use a tool (flathead screwdriver) to reach through the access hole in the ...
...liftgate glass won't lock when the vehicle is locked. How do I get it to lock? I removed the trim and then operated the lock manually by pulling up on the locking bar that runs from the liftgate lock ...
Question about 2006 Trailblazer
Remove the inside rear liftgate trim panel. Disconnect the threaded lock rod clip at the end of the push-button glass release and rotate this clip 1 complete turn at a time making the lock rod longer.
trim panel. Remove the cylinder lock rod from the threaded lock rod retaining clip. Tip Place the tip of a screwdriver blade into the opening of the C-clip and slowly rotate the screwdriver to pry out
trim panel. Remove the cylinder lock rod from the threaded lock rod retaining clip. Tip Place the tip of a screwdriver blade into the opening of the C-clip and slowly rotate the screwdriver to pry out
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions