...Remove the starter motor BAT terminal nut and electrical leads. Remove the starter motor S terminal nut and electrical lead. Remove the torque converter co Remove the starter motor bolts. Remove the ...
...the intake manifold support (9J444). Disconnect the S-terminal wire. Remove the B-terminal wire nut and disconnect the B-terminal wire. Remove the lower starter motor bolt. Remove the starter
...Remove the starter motor-to-transaxle bellhousing mounting bolts. Remove the starter from the vehicle. If equipped, remove the starter motor spacer. To install: If equipped, hold the starter motor ...
...Remove the starter motor from the vehicle. Detach the solenoid-to-starter motor wire from the solenoid terminal. Do not disassemble the solenoid; if the solenoid is defective, replace the entire unit ...
...Remove the starter motor from the vehicle Fig. 10: After removing the starter motor, examine the teeth of the flywheel for excessive wear or damage. Repair if necessary Fig. 11: If the old starter is ...
...assembly. Disconnect the (A) S-terminal wire, and the (B) B-terminal nut and cable from the starter motor. 6. Remove the lower starter motor bolt and remove the starter motor and solenoid
Question about 2001 Montana
...Remove the starter motor BAT terminal nut and electrical leads. Remove the starter motor S terminal nut and electrical lead. Remove the torque converter cover. Refer to Torque Converter Cover ...
Question about 2007 FXSTC Softail Custom
...remove the starter motor without removing the oiltank? It is generally possible to remove the starter motor on a 1998 Harley FXSTC (EVO) without removing the oil tank. However, it may be necessary to ...
Question about 2007 FXSTC Softail Custom
...Remove the starter motor: To remove the starter motor, first remove any obstructions, such as heat shields or brackets, that may be blocking access. Next, disconnect the wires from the starter motor ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions