Questions & Answers for: Suzuki remove replace oil pump 2005

Question about 2005 Forenza

2 Answers

...remove oil pan to put new gasket Removal Procedure 1. Disconnect the negative battery cable. 2. Drain the engine oil from the engine crankcase. 3. Remove the exhaust flex pipe retaining nuts from the ...

Ad

Question about 2005 Forenza

2 Answers

...remove valve cover and check if oil is draining into lower engine properly.   mine had the passages almost blocked that it drained down.   I spent hours cleaning the inside of the ...

Ad

...remove the seals, keep note which way round the seals are. they should be opposite. one keeps oil in and the other keeps the water out of the oil. if there are any score marks on the drive ...

Question about 2005 Boulevard C90

1 Answer

...oil. 3/Remove oil filter case @ centre of engine block below rad, that hump looking item 4/Put new oil filter the reverse of taking oil filter off. 5/ Close drain hole securely 6/Put new oil into ...

Question about 2005 Boulevard C90

1 Answer

...Remove the oil drain plug to drain engine oil, remove the coolant reservoir tank. Remove gearshift lever and engine sprocket cover. Disconnect water hoses. Remove the water pump mounting bolt and the ...

Question about 1991 Sidekick

2 Answers

replace the water pump. Why is it not simple to do? Looks like alot of parts have to be removed first, just to get to the water pump. Tony its about a 3 hour job at a professional shop. and it is a do

...oil pumps we plug on them is hard to remove to put new pump on so call nears dealer that use to sell them give Vin number they will tell you about warranty Pss there is a technical bulletin it came ...

...I need to locate the sender unit. Hi Charmaine, Kindly check this site to find the parts you are looking for. Hope it helps. 2005 Suzuki Boulevard S83 VS1400GLP OIL PUMP FUEL PUMP Babbitts

...oil pump? changed the two stroke oil pump after encountering a leakage of engine oil during high rpm but the leakage stops during idling. It sounds like wear on the bearing which means at high revs ...

...bearings you might take the oild pan off look inside see if theres fine metal on bottom of pan while your there look at the oil pump screen and look at the main bearings to see if they are worn ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...