...pump. Remove the water pump mounting bolts and nuts. Remove the water pump and gasket from the vehicle. Clean the water pump and the gasket mating surfaces. Install the water pump. Secure the water ...
...pump. Remove the drive belt guard. Loosen the water pump pulley bolts. Remove the drive belt. Remove the water pump pulley bolts. Remove the water pump pulley. Remove the water pump bolts. Remove the ...
...PUMP.REMOVE ALTERNATOR REMOVE WATER PUMP .REMOVE AC COMPRESSOR AND BRACKET .REMOVE CRANKSHAFT PULLEY REMOVE OIL PAN REMOVE OIL PUMP SCREEN AND THE TUBE REMOVE FRONT COVER REMOVE TIMING CHAINS REMOVE ...
...pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulley. 7. Remove the water pump ...
...pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulley. 7. Remove the water pump ...
...pump support. Remove the bracket mounting bolt located under the belt tensioner mounting. Remove 2 retaining nuts from the bracket mounting studs. Remove both mounting studs, and pull off the power ...
...pump. Remove the mounting bolts and the power steering pump from the engine. Remove the reservoir and pulley from the pump if necessary. To Install: Power steering pump removal/installation (3.8L ...
Question about 1984 GL 1200 Aspencade Gold Wing
...Pump 1) Remove the engine from the frame 2) Remove the engine read cover 3) Remove the clutch outer housing 4) Remove the bolts holding the oil pump to the cylinder block and remove the pump NOTE: ...
...pump. Remove the drive belt guard. Loosen the water pump pulley bolts. Remove the drive belt. Remove the water pump pulley bolts. Remove the water pump pulley. Remove the water pump bolts. Remove the ...
Question about 2006 Colorado
...pump gears. Remove the oil pump pressure relief valve plug. Remove the oil pump pressure relief valve and the spring. Clean and inspect the oil pump. Refer to Oil Pump Cleaning and Inspection . ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions