Questions & Answers for: remove pfister kitchen faucet

Pfister Main water line seems to have adequate pressure on nearby sinks and with the kitchen sink spray hose. Faucet has a hot and cold tap and both have low pressure. Filter screen on faucet is clean

...Pfister's site. sounds like your diverter is stuck or improperly installed ,try tapping at diverter location to free up diverter the other thing to try is remove the little device on the end of spout ...

...Pfister Marielle kitchen faucet. The valve body leaks when handle is in off position. There is an o-ring around the valve body inside the outer shell. This needs replacing -- sometimes you can match ...

...Pfister Marielle faucet - have gotten off two hoses but the last one that goes up to the faucet won't come lose. Any suggestions - quick? I may scream - we've had low water pressure for months. It is ...

Pfister's products. To repair it you will need a phillips screwdriver to remove the handles and crescent wrench to remove the cartridges. If it is dripping then one of the faucet cartridges need to be

Remove and clean the Price Pfister aerator. Turn the water on after you remove the aerator and check the flow-rate. Many new Lavatory and kitchen faucets are now equipped with Eco friendly water saver

Pfister 974-035. It looks similar to the valve in my faucet but would not fit in. It was a little larger in diameter, got stuck and broke apart when I tried to remove it. Is there a ceramic valve from

...Pfister F-WKP-400S Kitchen faucet with pull down spray head. Purchased on 5/11. It is the 529-YPK Ashfield Series. How do I remove the aerator for cleaning? The aerator is practically flush with the ...

Pfister Parisa I also needed to remove the "hidden" flow restricters from my Price Pfister Parisa Kitchen Pull out faucet. The hot water side had never flowed the same as the cold side. Now both sides

...Pfister 34 series kitchen faucet with pull down handle. I need to remove the diverter and have removed everything down to the spout assembly but I am unable to get the spout assembly off by simply ...