Questions & Answers for: HP LaserJet remove cover

...cover. 7 Remove the upper face cover 8 Remove four (4) screws from the upper cover 9 Lift up and remove the face-down cover 10 Remove the output tray by releasing the tabs. 11 Unplug the harness from ...

...cover 7 Remove the upper face cover 8 Remove four (4) screws from the upper cover 9 Lift up and remove the face-down cover 10 Remove the output tray by releasing the tabs. 11 Unplug the harness from ...

...remove rear cover 2 screws remove top rear cover 3 screws along forward edge use flat blade screw driver to lift sides remove left side cover 2 screws and 2 clips remove metal cover 10 screws (3 left ...

...remove tall gray cover on left remove black wiring cover on right, unplug 2 connectors and keeper remove 2 silver screws remove curved feed guide in front of fuser bottom. pull out fuser ...

...cover on. remove these along with the back cover.Then you'll see two screws at the back holding the grey top cover on, remove these and the one screw at the front . Remove the top grey cover and in ...

...cover. 5. Remove the left cover. 6. Squeeze the white link lever on the left side. 7. Remove the screw on the right white plastic catch, and then remove the plastic catch. 8. Close the ETB. 9. Remove ...

...cover, remove the grey plastic part first. There are four screws under it that hold the cover. There is a flat cable to the control panel. Remember to attach it when assembling. The fuser unit is ...

remove cover. 2. Remove EP door assembly a.) Along the left door hinge there is a flex point, firmly press tab inward to release door. 3. Remove main cover a.) Remove rear cover b.) Remove EP door c.)

cover. Remove the left cover. Squeeze the white link lever on the left side. Remove the screw on the right white plastic catch, and then remove the plastic catch. Close the ETB. Remove the small black

...cover, remove the two cables connecting the cover to the main board, pry gently at the top outer corners of the cover and pull it forward and down, remove the cover. 16. Now remove the four scanner ...