Questions & Answers for: Harley Davidson XLH Sportster 883 remove cover

Question about 1993 XLH Sportster 883

1 Answer

2004 polaris scrambler 500 4wd not engaging removed front hubs and put back together but now does not work. there is power to the magnets but not engaging for some reason. Make sure the magnetic coil ...

Ad

Question about 1993 XLH Sportster 883

1 Answer

Broken Positive Battery Cable on a 2000 Sportster Please describe the best way to remove & replace the + battery cable. What if anything can or needs to be removed so I can get to it ? Remove the ...

Ad

Question about 1993 XLH Sportster 883

2 Answers

...cover. On the right hand side, there is a nut on the end of the strap. Loosen this nut until the strap will come off the battery. Remove the negative side battery cable first but accessing the bolt ...

Question about 1993 XLH Sportster 883

1 Answer

...cover or "nose cone". You've taken the bolts out and tried to remove it but it only came about a quarter inch and will not come off any further and will not go back on either. The reason is that you ...

Question about 1993 XLH Sportster 883

1 Answer

...center compression for that cylinder.both rockers should have some give if at tdc. u can remove top rocker cover to check rockers. if spring is weak the valve won't open al the way or close

Question about 1993 XLH Sportster 883

1 Answer

...cover and remove the spring and the locknut. Remove all the bolts holding the cover on and while pulling on the cover gently, turn the clutch adjuster inwards and remove the cover. Good Luck ...

Question about 1993 XLH Sportster 883

1 Answer

...brake pedal. Now, take the large nut below the peg and brake pedal shaft off and the other two bolts that hold the front sprocket cover on. Remove the cover and you can get to the nut. Good Luck ...

Question about 1993 XLH Sportster 883

1 Answer

...remove the cover that has the two rivet looking pieces on the cover that has a 5 on it. What you are talking about is the timer cavity cover and it has a "V" for "V-twin". Ok, you must drill the two ...

Question about 1993 XLH Sportster 883

1 Answer

...remove the derby cover on the primary cover. Take the spring and lock nut out. Turn the clutch adjuster screw as far as it will go counterclockwise. Then turn it back 1/4 turn and reinstall the lock ...

Question about 1993 XLH Sportster 883

1 Answer

cover?.........please There are a number of allen head bolts you have to remove, unless you are planning on working on your clutch or your primary chain needs replacing I would not bother going to all

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...