Questions & Answers for: Harley Davidson XL 883 Sportster remove cover

how do I check the fluid level in a 2007 harley 883 custom i changed the derby cover and some oil came out. is it filled with the same oil reservoir that is filled on the right side of the bike? No ..

...Remove battery cover on left side of the bike, remove the positive and negative cables and take out battery. It is that simple but dosen't feel like it because it is so tightly fitted. If you think ...

...remove the rear brake master cylinder, the front chain sprocket cover, and the front chain sprocket. Going back to the left side of the engine and remove the four bolts that hold the transmission ...

...cover on a Sporty than simply removing the shift lever. You have to remove that lever, change the primary adjuster out, and swap all the clutch release mechanism and cable from one cover to the other ...

...cover off to remove the broken bolt so that i can replace it. Inspection cover and cover by the clutch cable were also removed, what is holding this cover in place? (Sportster 883xl) You need to ...

...cover. Remove the spring and lock nut underneath the derby cover. Remove the bolts around the primary cover. As you gently pull the primary cover away from the engine, turn the clutch adjuster screw ...

...REMOVE UPPER BATTERY CASE COVER. REMOVE NEGATIVE TERMINAL FIRST TO PREVENT ARCING POSITIVE TERMINAL INTO FRAME SOMEWHERE. NEG THEN POS. REMOVE BATTERY, REVERSE TO INSTALL AND THERE YOU HAVE IT

derby cover change Does the gasket need to be replaced when I put on skull derby cover? Yes, you should replace the o-ring every time you remove the cover.

shifter removal trans will not downshift Spring broken on shifter arm. Remove primary cover and inspect.

...cover and then remove the two starter mounting bolts and washers with a ball hex driver. THEN remove rear exhaust pipe, remove the positive battery lead and solenoid wire from the starter. Remove the ...