Questions & Answers for: Toyota Avalon how to remove the coil

Question about 1998 Avalon

1 Answer

...to remove the bearing support caps. Please do NOT try to compress the strut coils without the correct tool. You could get severly injured if you try this without a proper coil-spring

Ad

...coil over plugs) atop the sparkplugs, these must be removed first.**With Engine Cold** Front head: 1.remove Coils 2.use 5/8th plug socket and extension w/ratchet turn ratchet counter clockwise till ...

Ad

...remove coil over connecting clip ensuring to depress connector release. Next remove coil over retaining bolts. Remove coil over carefully directing coil toward driver side until rubber end able to ...

Question about 2002 Avalon

1 Answer

...remove the coil spring from the strut assembly without the proper tools, you could very well injure yourself. The coil spring is under a significent amount of tension. This is a job best left to a ...

Question about 2005 Avalon

2 Answers

...coil e and cant get to it No !! Take off the grill in front of the windshield u can get to it from there Right! Just remove the grill covering the windshield wiper motor. Then remove the windshield ...

What's wrong with my 1995 Toyota Avalon with Codes P0135 and P0773? 1995 Toyota Avalon XL with check engine light on on Codes P0773 and P0135?  P0135 indicates that the heated oxygen sensor 1

Question about 1998 Avalon

1 Answer

remove the spark plugs on the front and inspect. if the first one is wet and dark you need ignition coil.swap the coil with next cylinder clear code and run for a minute or till the check engine light

...remove the vacuum line at the regulator and smell for gas cause there should not be gas on that side of the diaphragm) fouled spark plugs, clogged exhaust or catalytic converter, stuck open or dirty ...

...coil and plugs on the back side, 2005 Toyota Avalon. V6 3.5L See this YouTube video: Toyota Avalon V6 DETAILED Spark Plug Replacement You'll see why dealers charge upwards of $400 for this job! You ...

...circuit continuity.

If you attempt to measure voltage at the same test point with the relay removed the reading will likely be zero (no reason the ECU would pullup its output). You can use an ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...