Questions & Answers for: Ford Expedition how to remove the coil

...remove the coil. the boot may come off if coil hasn't been moved in some time. use pliers to remove it if that happens. blow out spark plug hole with shop air. installed new coil. install 7mm bolt. ...

Ad

Question about 2003 Expedition

2 Answers

...coil so u know what to lok for. remove the plastic engine shroud...the spark plugs are under the individual coils. Each one has two bolts to remove the coils and after you pull them out the spark ...

Ad

...coil and remove it. This job is a real pain. The back ones are hard to get to. You will scream at it for a while. top of engine under the individual ignition coil , there are 8 total. u must remove ...

...remove the spark coil retaining screw to access the removal of the soark coil. The reoval with expose the spark plug at the bottom of the hollow tube in the head. The total spark coil is about 6-7" ...

...connector, remove the bolt and pull the coil and spark plug boot up out of the spark plug tube. (Reverse proceedure to install.) hi unplug the wires then remove the bolt give it atwist then pull it ...

...coil pack's, coil pack's held on with an 8mm bolt, sit right under injector fuel rail, disconnect harness to coil pack's remove 8mm bolt remove coil pack and remove spark plug's.Hope this was

Question about 2000 Expedition

1 Answer

...remove the coil pack. Under the coil pack is a boot similar to a plug wire boot. (see photo below) If you remove the plugs make sure the engine is cool and you use anti-seize on the threads when ...

Question about 2003 Expedition

1 Answer

...remove by simply pulling them out of the sparkplug coils. 2. Unscrew the 7mm bolt from each of the spark plug coils usinga socket wrench and 7mm socket. 3. Pull each spark plug coil out of the engine ...

Question about 2001 Expedition

1 Answer

...remove the on 8mm machine screw that retains each coil to the valve cover stand off, only do one at a time, twist the coil back and forth to break the bond of the rubber boot to the spark plug ...

Question about 2002 Expedition

1 Answer

remove each coil individually and then remove the plug. The plug is at a slight angle so you need a socket with an anti drop insert inside to prevent from dropping the plug. Take off the coil, replace

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Ford Expedition
2000 Ford Expedition

2,188 Questions

1999 Ford Expedition
1999 Ford Expedition

1,825 Questions

1998 Ford Expedition
1998 Ford Expedition

1,627 Questions

2003 Ford Expedition
2003 Ford Expedition

1,696 Questions

2001 Ford Expedition
2001 Ford Expedition

1,161 Questions

Manuals & User Guides

Loading...