spark plugs how do i change my spark plugs for my 2001 dodge durango. You'll have to remove part of the upper intake. Remove the coils one at a time. The spark plugs are located under the coils.
...remove the coil , (it will be really tight). You will need different lenght extenions to reach the spark plugs. When installing new plugs use piece of hose to start plugs (so not to cross tread the ...
...and coil ok .remove spark plug and compression test , if plug and compression ok refit plug, start engine and back probe injector with led test light, if injector pulse ok clean or replace
...the AC, removing heater hoses, and hardware at the firewall. The complete dashboard needs to be removed and swung out of the way, steering column lowered , and heater box removed and disassembled ...
...remove the nut that is holding the coil in place. After the nut is removed, you simply pull the coil up and out of the engine. After the coil is removed, you can see the plug below. Remove the spark ...
...coil connector. With the key on, the light should light. If not, swap the relay with another similar one--say the horn relay and try again. If still no voltage, interrogate the relay socket per ...
Remove the coil HT cable from the distributor, hold I/2 inch from engine block while engine cranking spark should jump this gap, if so coil and cable ok, remove distributor cap, place coil cable close
that is not a coiled O ring it is a sring lock retainer. You did you the release tool to remove them right
...coil and remove the 10mm nut that holds it down, then slide the coil up and out. Once it's out then you can use a spark plug socket and extension to remove the plugs. It's a ...
...coil located? You will need to remove the Air Box (The Air Dust Filter Box) to get to your coil. It should be located on the left side of the motor. Please watch this video for more insightful ...
Usually answered in minutes!
2,049 Questions
1,616 Questions
1,378 Questions
886 Questions
1,005 Questions
