...bowl is to remove the float bowl with the carb on the engine or remove the carb from the engine and turn it on it's side to drain the old fuel out. I wouldn't recommend removing the float bowl unless ...
...remove the float bowl. On the bottom of the float bowl, there is a small round looking plate with three screws that hold it on. One of the screws also holds the float bowl to the body of the carb so ...
off the fuel. You need to remove the bottom of the float bowl. This is easiest done by removeing the carb from the bike because you have 4 screws to undo on the float bowl. Really is pretty easy to do
Question about 2002 XLH Sportster 883 Hugger
...remove the float bowl from the bottom of the carb. Turn off the fuel at the petcock. Take the four bolts that hold the float bowl on out and lower the float bowl. Pour the fuel out of the bowl and ...
Question about 2004 FLSTC - FLSTCI Heritage Softail Classic
...bowl down and remove it. Look into the bottom of the bowl and see how much trash or whatever is in there. Turn the bowl upside down and remove the two screws left that hold the accelerator pump cover ...
...bowl and remove it from the carb. Turn the float bowl upside down and there will be two screws that hold the accelerator pump plate onto the float bow. Remove these two screws. Under the plate you'll ...
...the float bowl on and remove the float bowl. Then, carefully drift out the float pin and remove the float and the needle. Blow out the seat and clean the needle. Reassemble the carb. Good Luck ...
drain gas bowl What year??? remove float bowl cover.
Question about 1993 XLH Sportster 883 Deluxe
How do you drain a float bowl on a 2004 883 sportster? remove the float bowl screws and take the cover off
...remove the bottom bowl screws, separate the bowl from the carb gently and you will see the float(s) hanging. the very center post of the carb body will have the main jet installed ..it should have a ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions